Westinghouse Compatible French Door Fridge Water Filter for WHE6060SA

EPTWFU01-WF Refrigerator Water Filter Operating Specifications are as Follows:
* Service Life: 6 months Max
* Minimum Temperature: 0.6oC (33oF)
* Maximum Temperature: 38oC (100oF)
* Maximum Pressure: 690 kPa (100 PSI)
* Maximum Flow: 2.46 L/min (0.65 Gal/min)

***Water high in particles or other contaminants may reduce service life.***

Compatible with select Frigidaire refrigerators
Including select models beginning mid-2015 for use with your current appliance.

Removes chlorine taste and odor
Along with atenolol, asbestos, atrazine, bisphenol A, cysts, estrone, lead, mercury, naproxen, nonylphenol,
O-Dichlorobenzene, P-Dichlorobenzene, phenytoin, terachloroethylene, toxaphene, trimethoprim and VOCs.

Lasts up to 6 months
For minimal refills.

Carbon block filter reduces chlorine taste and odor, cysts, particulates, lead, mercury, BPA, naproxen and other substances
The filter should be replaced every 6 months.

Compatible Frigidaire Filter Model/Part Numbers:

• EPTWFU01
• EPTWFU01C
• 4562222
• 012505454226
• UNILUX ULX220

Compatible Refrigerator Model Numbers:

• Electrolux
• EHE6899SA
• EBE5367SA
• EHE6899SCA
• EBE5367SB
• EHE5267SB
• EHE6899SA

MODEL NUMBER > ERE5047SA-R > PNC NUMBER > 925060115
MODEL NUMBER > EHE5267SA-D > PNC NUMBER > 925060114
MODEL NUMBER > EBE5367SA-R > PNC NUMBER > 925060112

Westinghouse

• WSE6870SA
• WHE6060SA
• WBE5360SA
• WHE7074SA
• WSE6170SA
• WHE5260SA
• WHE6874SA
• WQE6170SA

MODEL NUMBER > WHE5260SA-D > PNC NUMBER > 925060031
MODEL NUMBER > WSE6870SA > PNC NUMBER > 956001679

Frigidaire

• FPBC2277RF
• FPBC2277RF0
• FPBC2277RF1
• FPBC2277RF2
• FPBC2277RF3
• FPBG2277RF
• FPBG2277RF0
• FPBS2777RF
• FPBS2777RF0
• FPBS2777RF1
• FPBS2777RF2
• FPBS2777RF3
• FPBS2777RF4
• FPSC2277RF0
• FPSS2677RF0

Installation
1. To remove the current filter, locate the filter housing inside the fridge in the top back corner.
2. Hold the end of the filter cartridge and turn to the left (anti-clockwise) and pull out to remove.
3. Discard the old filter.
4. Insert the new filter into the filter housing in the fridge with the grip on the end of the filter oriented horizontally.
5. Push the filter in and turn 90 degrees to the right (clockwise) until it clicks into place.
6. Run water through the dispenser for about 3 minutes, or until a few litres has passed through the filter. Discard the water. Your water filter is now installed and ready to go!

NOTE: Install in cold water applications only.
NOTE: Do not use where water is microbiologically unsafe or of unknown quality without adequate disinfection before or after unit.