Stiebel Eltron SNE5 Open Vented Water Heater With MES Mixer SNE 5 + MES

Suitable for supplying hot water to individual draw-off points, e.g. a kitchen sink. The SNE is a premium offering over other open vented water heaters in the STIEBEL ELTRON range. With the addition of a digital display and new features, including timing and ECO functions for even greater savings.

The SNE 5 is equipped with an electronic control unit and ensures convenient and efficient water heating. The water temperature can be adjusted precisely from 35oC-85oC on the user interface LCD. A power saving ECO function can be enabled at the press of a button. A hygiene circuit for pasteurisation is also integrated. Three adjustable and programmable weekly timers (home, office, individual). Display of the actual temperature, operating time and heating time.

The anti-drip function prevents expansion water dripping during heat-up of the cylinder, thereby saving water and reducing limescale build-up on the taps and sink. The energy saving thermostop function prevents unwanted heating of the mixer tap. Freely adjustable minimum and maximum temperatures (anti-scalding protection). Automatic frost protection. Display of the enabled ECO function and heat-up indicator. Internal plastic cylinder made from polypropylene with high grade EPS thermal insulation for the lowest possible energy losses.

PROFI-RAPID installation system ensures quick and straightforward installation for licenced plumbers. Simple wall mounting with universal mounting rail included as standard. Installation template included in the standard delivery. Protection rating IP 24 D (splashproof).

Robust copper tubular heater with low surface load for a long service life. Resettable high limit safety cut-out for safe commissioning. Electronic temperature limit for anti-scalding protection can be set to the exact degree required.

The SNE is a non-pressurised appliance for use with non-pressurised open vented taps only. Undersink installation.

PLEASE NOTE: Tapware warranty is provided by ENWARE Australia.

Data Sheet
Operation and Installation Guide

FEATURES
Premium LCD display
ECO and timing functions
Designed for single sink
Point of use design - save energy and water
Low minimum standby power consumption
Must be fitted with specialised open vented tapware
SNE is made in Germany

Model number: SNE 5

Rated output (230V): 2kW

Rated current (230V): 10 A

Phases: 1/N/PE

Electrical Installation: As per AS/NZS3000

Installation requirements: AS/NZS3500.4.2 & local requirements

Type of installation: Under sink

Temperature adjustment: 30 - 85oC

Tank capacity: 5 Litres

Mixed water volume at 40oC from single draw off: 10 Litres

Standby energy consumption / 24 hours at 65oC: 0.2kWh

IP Rating: IP 24 D

Weight (filled with water): 8.1kg

For one draw off point: Yes

Please note: The SNE under sink single point of use water heater is open vented and must be installed with a STIEBEL ELTRON open vented sink mixer.